Product ID:WATER GUARD-WOOD (SOLVENT), 51760A
MSDS Date:12/27/1990
FSC:8010
NIIN:00N040418
MSDS Number: BSDZN

PPG INDUSTRIES INC

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555; 800-441-9695

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

NAPHTHA, MEDIUM ALIPHATIC; (MEDIUM ALIPHATIC SOLVENT

CAS: 64742-88-7

Fraction By Weight: 1-2%

NAPHTHA, MEDIUM ALIPHATIC; (MEDIUM ALIPHATIC SOLVENT

CAS: 64742-88-7

Fraction By Weight: 85-90%

FILM FORMERS, RESINS & ADDITIVES

Fraction By Weight: 5-10%

DETERM TYPE OF AIRBORNE CONTAMS AGAINST WHICH

RTECS: 9999999ZZ

BELOW STATED LIM, & TO REMOVE DECOMP PRODS DURING

RTECS: 9999999ZZ

RUBBER, NITRILE RUBBER, BUTYL RUBBER OR LATEX

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL/FATAL IF SWALLOWED.
EYE:CAUSES IRRIT. REDNESS, ITCH, BURNING SENSATION & VISUAL
DISTURBS MAY INDICATE EXCESS CONT. SKIN:MAY CAUSE MOD IRRIT.
DRYNESS, ITCH, CRACKING, BURNING, REDNESS & SWELL ARE CNDTNS ASSOC
W/EXCESS CONT. INHAL:VAP & SPRAY MIST MAY BE HARMFUL. VAP IRRITS
EYES, NOSE & (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:THROAT. RPTD EXPOS TO HIGH VAP CONCS
MAY CAUSE IRRIT OF RESP SYS & PERM BRAIN & NERV SYS DMG. INTENT
MISUSE BY DELIB CONC & INHAL CONTENTS CAN BE HARMFUL/FATAL. EYE
WATERING, HDCHS, NAUS, DIZ Z & LOSS OF COORD ARE INDICATIONS THAT
SOLV LEVELS ARE TOO HIGH. CHRONIC:AVOID LONG TERM & RPTD CONTACT.

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
FOR @ LST 15 MINS. SKIN:FLUSH IMMED W/PLENTY OF WATER BY WASHING
W/SOAP & WATER. INHAL:REMOVE TO FRESH AIR. APPLY ARTF RESP & OTHER
SUPPOR TIVE MEASURES AS REQD. OTHER:IF ANY OF FOLLOWING OCCUR
DURING/FOLLOWING USE OF THIS PROD, CONT POIS CTL CTR, EMER ROOM/MD
IMMED; HAVE MSDS INFO AVAIL: INGEST; EXCESS EXPOS TO CORR MATL;
(SUPDAT)

Flash Point Method:PMCC
Flash Point:105F,41C
Lower Limits:1%
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA
(SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFT. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPDAT)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHLD BE PERMITTED IN AREA.
REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSORB MATL & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE >120F. STORE LG QTYS IN
BLDGS DESIGNED & PROT FOR STOR OF NFPA CLASS II COMBUST LIQS.
CNTNRS SHLD BE GROUNDED WHEN POURING.
Other Precautions:IF THIS MATL IS PART OF A MULTIPLE COMPONENT COATING
SYS, READ MSDS(S) FOR OTHER COMPONENT(S) BEFORE BLENDING AS
RESULTING MIXT MAY HAVE HAZS OF ALL OF ITS PARTS. AVOID FREE FALL
OF LIQS IN EXCESS OF A FEW INCHES.

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CTLS, VAP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C-)
PAINT SPRAY/AIR SUPPLIED (TC-19C-) RESPS MAY ALSO REDUCE EXPOS.
READ RESP MFR'S INSTRUCTI ONS & LITERATURE CAREFULLY TO (ING 4)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIM, LEL (ING 5)
Protective Gloves:POLYVINYL ALCOHOL, NEOPRENE (ING 6)
Eye Protection:ANSI APRV CHEM WORK GOG&FULL LGTH FCSHLD
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
EXTING MEDIA:CLASS II COMBUST LIQ FIRES. FIRE FIGHT:POSS
AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG
NOZZS ARE PREF. EXPLO HAZ:SURFS. TOX GASES MAY FORM WHEN PROD IS
CONTACTED BY FLAME/HOT SURFS. HAZ DECOMP PROD:FUMES INCL: CARBON
MONOXIDE. FIRST AID PROC:PERSISTENT SKIN/EYE IRRIT/BRTHG DFCLTYS.

Boiling Pt:B.P. Text:>275F,>135C
Vapor Pres:1.9
Vapor Density:HVR/AIR
Spec Gravity:0.79
Evaporation Rate & Reference:16 (BUOAC=100)
Solubility in Water:0.1%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACTERISTIC OF SOLVENTS
LISTED IN INGREDIENTS SECTION.
Percent Volatiles by Volume:91.6

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURFS COATED W/THIS PROD
MAY PRDCE (SUPDAT)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF I/A/W
FEDERAL, STATE, PROVINCIAL & LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT F ACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.